Water Heating/Laundry
For Your Home
 
Clothes Washers

Styles of Washing Machines
Save Energy

Washing machines are typically responsible for more of the cost of hot water than any other appliance. However, washing machines have become more efficient in recent years; the past 10 years have seen efficiency gains of almost 20%, and improvements in detergents have led to greater use of cold water washes and rinses, significantly reducing energy consumption. There are over 80 million clothes washers in U.S. homes. A clothes washer in a typical household uses about 15,000 gallons of water per year or roughly 15% of the total household consumption.

Styles of Washing Machines
Vertical axis washing machines make up over 95% of the market in the U.S. Less than 5% are horizontal axis machines, but their popularity is rising. Along with energy and water savings, manufacturers of horizontal axis washing machines also report that their machines use less detergent, wash more completely, reduce wear and tear on clothes, and spin dry clothes more effectively so that shorter drying cycles are required. A typical vertical axis washing machine uses 40 gallons of water to wash and rinse clothes. Roughly half of the water is used for the wash cycle and half for the rinse cycle. Compare this to a similar horizontal axis machine that uses 27 gallons of water. While the water used by a vertical axis machine is divided evenly between wash and rinse, a horizontal axis machine uses less water for the wash cycle, which typically uses more hot water than the rinse cycle. Therefore, depending on temperature selection, horizontal axis washers will often reduce hot water usage by 70%. Of course, if you use entirely cold water for washing and rinsing (which arguably washes clothes as effectively as warm water), then a horizontal axis washer will not save any hot water. However, there still remains the benefit of reduced water consumption as well as the cost of water and wastewater disposal (plus the other benefits noted above). A typical family of four can expect to reduce water consumption by roughly 5,000 gallons annually using a horizontal axis washer. At the national rate of $2.84/1,000 gallons of water, this amounts to savings of $14 for water alone! In areas with high water costs, the savings can be significant.

elaundry.jpg (10827 bytes) Most washing machines are a standard size of about 28 inches wide, with a maximum capacity of roughly 40 gallons. There are also compact units, often designed to be stacked on top of dryers to save space. Such units are popular in apartments. Combination washer-dryers, which are a washer and dryer in one unit, are also well suited for smaller spaces. Today’s washing machines offer a variety of options with respect to the number and type of cycles. Although the choices can be confusing, different fabrics do require varying washing conditions for optimum cleaning. There has also been a reduction in noise levels for many models, important for machines located in kitchen areas. When selecting a new washing machine, these are among the issues to consider along with cost, capacity, and energy efficiency.

Save Energy
Like dishwashers, much of the cost—up to 90%—of operating washing machines is associated with the energy needed to heat the water. Washing only full loads is good rule of thumb for reducing hot-water consumption in clothes washers. As you would for dishwashers, consult the EnergyGuide labels when shopping for a new washing machine and choose machines with an ENERGY STAR® label. . Inefficient washing machines can cost three times as much to operate as efficient machines. Select a machine that allows you to adjust the water temperature and water levels for the size of the load. Smaller capacity washing machines often have better EnergyGuide ratings. However, a reduced capacity might cause you to increase the number of loads you wash and possibly increase your energy costs.

 

   
 
Copyright © Aclara Technologies LLC. All Rights Reserved.